Skip to content
AirModuleLink

Questions

Straight answers.

What it is, how it is set up, which cars it reaches, how the link is kept safe, and how to get one.

The product

What is AirModuleLink?

AirModuleLink is a rugged box that plugs into a vehicle's OBD-II diagnostic port and connects that car to a technician somewhere else. The technician uses their own key programmer, diagnostic tool or OEM software as though the car were in front of them. The person at the car only plugs the box in and gets it online.

How is this different from a remote programming service?

A remote programming service sells you a job done by its own technicians on its own equipment. AirModuleLink is the link itself: your tools, your OEM subscriptions and your technician, on a car that is somewhere else. If you have no programmer, our own bench can be the technician on the other end.

What are the two ways of working?

Tool Tunnel carries the car's CAN bus to a dock at your shop, so a standalone key programmer or diagnostic tool plugged into the dock talks to the car directly. J2534 pass-thru lets the vehicle maker's own software, running on your computer, drive the car through the IgniteRemote J2534 link.

When can I get one?

AirModuleLink launches in mid-December 2026. You can join the list to receive the introductory price, or reserve a box from the first batch today for $99.

Who makes it?

AirModuleLink comes from the creators of IgniteRemote, the remote access and J2534 tool sharing software it runs on. Adrian Torres, a locksmith since 2012, started it to serve his own customers' cars remotely, and it is designed, printed and bench-tested in Arlington, Texas.

Setting it up

What does the person at the car have to do?

Three things. Plug the lead into the OBD-II port. Get the box online, by plugging in a network cable, by plugging in a phone and turning on tethering, or by joining the box's own setup Wi-Fi and choosing a network. Then tell the technician it is in. There is no computer, no app to install and nothing to type on the box.

How does the box get on the internet?

Three ways, and it picks the best one by itself. A network cable in its Ethernet port always wins. Next is a phone on its USB port with tethering on (Android) or Personal Hotspot on (iPhone). With nothing plugged in, the box raises its own setup Wi-Fi: join it from a phone, a page opens, choose the Wi-Fi the box should use and press Connect this box. It is online in about a minute and remembers a network that worked.

Does it need a SIM card or a data plan?

No. The box uses a network cable, a phone tethered by its lead, or a Wi-Fi network, including a phone's hotspot. Whatever internet is already at the car is enough.

What does the technician need at the shop?

A Windows computer running the IgniteRemote app. For Tool Tunnel, also the dock: a powered OBD-II socket on CAN adapters, which your tool plugs into exactly as it would plug into a car. The technician picks the box from a list in the console and presses Start. Nobody types an address, a port or a token.

How fast does the internet connection need to be?

Steadiness matters more than speed. A CAN bus is a small amount of data; what breaks a session is delay and loss. A network cable or a tethered phone is better than a weak Wi-Fi signal under a dashboard. The link is measured before any programming sequence, and a link that measures badly is refused with the reason.

Vehicles and protocols

Which vehicles does it work on?

Vehicles with CAN at the OBD-II port, which is every car and light truck sold in the United States since model year 2008. It carries classic CAN and CAN FD on pins 6 and 14, the second CAN pair some makes put on pins 3 and 11, and DoIP diagnostics for cars that use Ethernet. Older vehicles that speak only K-line or J1850 are outside its range. What your tool can do on a given car is still decided by the tool.

Does it support DoIP?

Yes, for diagnostics. The box finds a DoIP vehicle, opens routing and relays diagnostic reads and scans to a tester at your shop. Programming a DoIP car is done with the maker's software through IgniteRemote on a computer at the car.

Which OBD-II pins does it use?

Pins 6 and 14 for the main CAN bus. Pins 3 and 11 for the second CAN pair some makes use; on a DoIP car those two pins are half of the Ethernet link instead, so the box listens before it joins them. Pins 12 and 13 complete the DoIP Ethernet pairs and pin 8 is the DoIP activation line. Pins 4 and 5 are the grounds. The box runs from its own battery, so it leaves pin 16 alone.

Will my key programmer work through it?

If it talks to the car over CAN, it is the right shape for Tool Tunnel: the tunnel carries CAN frames without interpreting them, so the tool's own protocol passes through untouched. Tell us which tool and which cars when you reserve and we will tell you plainly how it fits.

Does it bypass a secure gateway or an immobilizer?

No. AirModuleLink is a link, not a way around security. Your tool or OEM software authenticates exactly as it would at the car, with your own credentials and subscriptions. Security access, gateway registration and proof of ownership remain between you, the vehicle maker and the customer.

Safety and security

What happens if the connection drops in the middle of programming?

The first defence is not starting. The link is measured before a programming sequence may begin, and one that cannot be measured or measures badly is refused. During a job the car end recovers from bus errors by itself and both ends pair again after a short network loss. As in any bay, a stable connection and a supported battery at the car are what make a write safe.

Is the link encrypted?

Yes. Traffic between the box and your dock is encrypted, and each job is a short-lived lease the server grants for that job only. A box is enrolled to one organisation and is visible only to it.

Can I leave it plugged into a customer's car?

It is made to be plugged in for the job and taken out afterwards. The box runs from its own battery and draws nothing from the vehicle. The case is ventilated, so keep it inside the cabin and dry.

Buying

What does it cost?

The price of the box will be announced before launch in mid-December 2026. Join the list and we will email you the introductory price first, or reserve a box from the first batch today for $99. The deposit comes off the price and is refundable until your box ships.

What do I get for the $99 reservation?

A box from the first batch, at the introductory price. The $99 is a payment toward the box, not a fee on top of it, and reservations are filled in the order they arrive.

Can I get my deposit back?

Yes. Change your mind for any reason before your box ships and the whole deposit goes back.

What is the difference between joining the list and reserving?

Joining the list is free: we email you the introductory price and tell you first when ordering opens. Reserving for $99 puts your name on a box from the first batch, which is built by hand and limited.

I am a shop without a programmer. Can you do the programming?

Yes, ask us. Our own bench programs modules every day, and for a shop that has no programmer the box can connect one of ours to your car. Use the reservation form and tell us which makes you need covered.

Launching mid-December 2026

Put your bench in a car that is somewhere else.

Reserve a box from the first batch today for $99, refundable until it ships. Or join the list and get the introductory price before it is public.