# AirModuleLink > AirModuleLink is a rugged box that plugs into a vehicle's OBD-II port and puts a remote technician's own tools and OEM software on that car over CAN, CAN FD and DoIP. It launches in mid-December 2026. From the creators of IgniteRemote. AirModuleLink is a hardware box built around a Raspberry Pi Compute Module 5. It plugs into a vehicle's OBD-II port and connects that car, over the internet, to a technician somewhere else. The technician works with their own key programmer or diagnostic tool (Tool Tunnel) or with the vehicle maker's own software (J2534 pass-thru). The person at the car only plugs the box in and gets it online. ## Key facts - Launch: mid-December 2026. - Ways to get one: join the list for the introductory price (free), or reserve a box from the first batch for $99 (comes off the price, refundable until the box ships). The price of the box is announced before launch. - Buses: CAN and CAN FD on OBD-II pins 6 and 14, a second CAN pair on pins 3 and 11, and DoIP diagnostics (ISO 13400) on pins 3, 11, 12 and 13 with activation on pin 8. - Vehicles: those with CAN at the OBD-II port, which is every car and light truck sold in the United States since model year 2008. Vehicles that speak only K-line or J1850 are outside its range. - Getting online at the car: the box's own setup Wi-Fi, a phone tethered by USB, or a network cable. About a minute. No SIM card, no app. - Platform: IgniteRemote (https://www.igniteremote.com). - Founder: Adrian Torres, a locksmith since 2012. - Designed, printed and bench-tested in Arlington, Texas. ## Pages - [How it works](https://www.airmodulelink.com/how-it-works): the steps at the car and at the shop, and the three ways the box gets online. - [Protocols](https://www.airmodulelink.com/protocols): CAN, CAN FD, DoIP, J2534 and the OBD-II connector pin by pin. - [DoIP](https://www.airmodulelink.com/protocols/doip): DoIP (Diagnostics over Internet Protocol, ISO 13400) carries a vehicle's diagnostic and programming messages over Ethernet and TCP/IP instead of over the CAN bus. - [CAN and CAN FD](https://www.airmodulelink.com/protocols/can-fd): CAN FD (CAN with Flexible Data-rate, ISO 11898-1:2015) is the faster successor to classic CAN: up to 64 bytes in a frame instead of 8, with the data sent at a higher bit rate than the rest of the frame. - [J2534 pass-thru](https://www.airmodulelink.com/protocols/j2534): SAE J2534 is the standard interface between a computer running a vehicle maker's software and the hardware, called a pass-thru device, that connects that computer to the car. - [OBD-II pinout](https://www.airmodulelink.com/protocols/obd2-pinout): The OBD-II connector (SAE J1962) is the 16-pin diagnostic socket under the dashboard; pins 4, 5 and 16 are ground and battery on every car, pins 6 and 14 are CAN, and several others are left to the vehicle maker. - [Proof](https://www.airmodulelink.com/proof): what has been run, on what, and when. - [Compare](https://www.airmodulelink.com/compare): AirModuleLink beside other ways of programming a vehicle remotely, with sources. - [AirModuleLink and Opus IVS RAP / RAP2](https://www.airmodulelink.com/compare/opus-ivs-rap) - [AirModuleLink and Autel Remote Expert with MaxiFlash XLink](https://www.airmodulelink.com/compare/autel-remote-expert) - [AirModuleLink and Launch SmartLink C and SmartLink B](https://www.airmodulelink.com/compare/launch-smartlink) - [AirModuleLink and asTech remote services](https://www.airmodulelink.com/compare/astech) - [AirModuleLink and A laptop at the car and remote desktop](https://www.airmodulelink.com/compare/laptop-and-remote-desktop) - [Pricing and reservations](https://www.airmodulelink.com/pricing) - [Reserve](https://www.airmodulelink.com/reserve) - [Questions](https://www.airmodulelink.com/faq) - [About](https://www.airmodulelink.com/about) ## More - [Everything on one page](https://www.airmodulelink.com/llms-full.txt)